How to hang your HYLUS Acrylic Glass Art on your wall with our Ghost Mount
Congratulations on your shiny new HYLUS Acrylic Glass Art Piece!

We ship all products with all accessories to mount them on your wall, so everything you see here will be in your package. Our mounts use a technique specific only to HYLUS, which we call ‘Ghost Mounting’ - this method is an almost invisible way to mount your HYLUS art piece on your wall.

We know you are excited to hang your beautiful piece on your wall, so here's a handy guide to walk you through the Ghost Mounting process:

Step 0

Along with your HYLUS Acrylic Glass Art there will be one or more Ghost Mounting packets in your package, each containing two Ghost Mounting parts (Part A and Part B).

Step 1

Peel off the two orange safety stickers from the back of Part B.

Step 2

For Skateboards:

You'll get one Ghost Mount in your package. Measure where the middle of your product falls, and place Part B in that spot, with the stickers facing the back of the board. Apply big pressure for at least 10 seconds to make sure Part B is perfectly glued to your board.

Applying Part B to the middle, and applying big pressure on it for at least 10 seconds is very importrant! If these two steps are not followed, your product may fall off the wall!

For Surfboards:

You'll get three Ghost Mounts in your package. Place one Part B on the top, one in the middle, and one on the bottom, with the stickers facing the back of the board. Apply big pressure for at least 10 seconds to make sure Part B is perfectly glued to your board.

Applying Part B to the top, middle and the bottom, and applying big pressure on it for at least 10 seconds is very importrant! If these two steps are not followed, your product may fall off the wall!

For Glass Prints:

Depending on the size you've ordered, you'll get one, two, or four Ghost Mounts in your package. If you got one, place Part B in the middle point of the back of the Glass Print. If you've got two, place one Part B on both horizontal sides. If you've got four, place one Part B on each corner in the back. Apply big pressure for at least 10 seconds on each Part B to make sure they are perfectly glued to your Glass Print.

Applying Part B to the top, middle and the bottom, and applying big pressure on it for at least 10 seconds is very importrant! If these two steps are not followed, your product may fall off the wall!

Please note: If you place Part B with its hook facing down (as seen on the image above), your board or print will be hanging vertically. You're welcome to place Part B with its hook facing any direction, depending on how you would like your board or print to be hung - this is totally up to you, and whether you would like your board or print to hang vertically, or horizontally.

Step 3

Take Part A, and see how it fits into Part B's hook. Make sure to remember how Part A fits when inserted into Part B's hook - this will be important in the next step.

Step 4

Nail Part A to your wall, with the side which fits your product facing outside.

Please note: We recommend using nails in this step, however if you are unable to screw holes in your apartment's walls, feel free to use sticky hanging strips (which can hold your product's weight) to glue Part A on your wall.

Step 5

Hook Part B (on your product) on Part A (on your wall).

Please note: If you are unable to hook Part B to Part A, you have probably nailed Part A reversed on your wall. This is why it's important to check the sides of Part A in Step 3!

Step 6

All done. Enjoy your HYLUS Acrylic Glass Product(s)!

 

If you need any further help or have any questions, please don't hesitate to contact us on info@hylus.co.uk.